Torque Solution Solid Rear Subframe Bushings Porsche 911 996 | 997 98-12

Model: TS-POR-005

Производитель: Torque

Torque Solution Solid Rear Subframe Bushings
Applications:

Цена: 200.81$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/torque-solution-solid-rear-subframe-bushings-porsche-911-996-997-98-12-67918.html

KW 2-Way Clubsport Coilovers with Mounts Porsche 997 Turbo | S 07-11

Model: 35271823

Производитель: KW

KW Clubsport coilovers were developed for enthusiasts who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.
-Height adjustable coilovers
-Performance setup for the racetrack
-Dampers in compression & rebound forces independently adjustable
-Use of high performance linear race springs
-In stainless steel technology inox-line
-Additional available with racing top mounts
-TUV approval possible depending on the specification

Compression and Rebound Adjustment

The rebound adjustment, produced with the widest range of adjustment for that specific vehicle, is carried out by an adjustment spindle at the end of the piston rod. Most of all, the rebound controls the car body vibration, but at the same time the damping range also affects the handling and comfort at low speeds. With the rebound adjustment, the car can be adjusted to the demands of the driver; the driving impression can range from comfortable ride quality to a tighter and tense ride with improved road-holding characteristics.

The compression adjustment takes place at the lower end of the shock absorber by our patented multi-purpose valve. The number of pre-adjustable parameters of this valve allows a wide range of adjustments. The unique low-speed compression adjustment makes this technology unique. Within this damping range, the driving behavior of the car is strongly influenced. An increasing damping force already supports the car at the compression and therefore avoids rolling motions. The steering behaviour significantly improves.

High-Performance Race Springs

The new KW high-performance springs are produced from specially alloyed and tempered spring steel, and the increased resilience of the material enables new spring designs with reduced spring thickness. This makes the springs up to 30% more efficient than conventional racing springs. With the same overall length this means:
-more suspension travel
-higher block loading
-lower weight

Further weight reduction can be achieved by shortening the overall length of the springs and adjusting the necessary block loading.
-shorter overall spring length
-improved freedom of wheel movement
-further weight reduction

Aluminum Unibal Top Mounts

Adjustable top mounts are made from high grade aluminum and are included in the application when a technical advantage can be achieved. A special gasket system prevents the intrusion of dirt and moisture into the free-from-play pre-stressed uniball-bearings and therefore prevents corrosion and wear.
-Scaled camber adjustment (optionally also caster)
-Sealed, pre-stressed uniball-bearing in stress direction
-Made of tool steel (100Cr6); 58 to 64 HRC - hard chrome plated
-PTFE lubricant, stainless steel outer ring (X200Cr13)
-Axial bearing as balance on McPherson struts

Porsche 997 Turbo Coupe ALL 07+ Kit Features:

KW Clubsport suspension kits are independently adjustable in compression and rebound forces and include high performance racing springs. Racing top mounts are optionally available for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
-2-Way Adjustable
-Includes Unibal Top Mounts
-Lowers 20-40mm Front / 20-40mm Rear
-Spring Rates: 400lbs/in Front / 970lbs/in Rear
-Limited Lifetime Warranty

NOTE: If the car is equipped with PASM, the PASM needs to be disabled.

Click here for installation instructions.

Цена: 6999.99$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-2-way-clubsport-coilovers-with-mounts-porsche-997-turbo-s-07-11-67919.html

KW HLS 2 Front Axle Lift System Upgrade for Existing KW Coilover Kit Porsche 911 997 Turbo Cabrio, with PASM 08-12

Model: 19271229

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Cabrio, w/ PASM 08-12

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-axle-lift-system-upgrade-for-existing-kw-coilover-kit-porsche-911-997-turbo-cabrio-with-pasm-08-12-67920.html

KW HLS 2 Front Axle Lift System Upgrade for Existing KW Coilover Kit Porsche 911 997 Turbo Cabrio, with PASM 08-12

Model: 19271229

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Cabrio, w/ PASM 08-12

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-axle-lift-system-upgrade-for-existing-kw-coilover-kit-porsche-911-997-turbo-cabrio-with-pasm-08-12-67921.html

KW HLS 2 Front Axle Lift System Upgrade for Existing KW Coilover Kit Porsche 911 997 Turbo Cabrio, without PASM 08-12

Model: 19271229

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Cabrio, w/o PASM 08-12

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-axle-lift-system-upgrade-for-existing-kw-coilover-kit-porsche-911-997-turbo-cabrio-without-pasm-08-12-67922.html

KW HLS 2 Front Axle Lift System Upgrade for Existing KW Coilover Kit Porsche 911 997 Turbo Cabrio, without PASM 08-12

Model: 19271229

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Cabrio, w/o PASM 08-12

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-axle-lift-system-upgrade-for-existing-kw-coilover-kit-porsche-911-997-turbo-cabrio-without-pasm-08-12-67923.html

KW HLS 2 Front Axle Lift System Upgrade for Existing KW Coilover Kit Porsche 911 997 Turbo Coupe, with PASM 07-12

Model: 19271223

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Coupe, w/ PASM 07-12

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-axle-lift-system-upgrade-for-existing-kw-coilover-kit-porsche-911-997-turbo-coupe-with-pasm-07-12-67924.html

KW HLS 2 Front Axle Lift System Upgrade for Existing KW Coilover Kit Porsche 911 997 Turbo Coupe, with PASM 07-12

Model: 19271223

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Coupe, w/ PASM 07-12

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-axle-lift-system-upgrade-for-existing-kw-coilover-kit-porsche-911-997-turbo-coupe-with-pasm-07-12-67925.html

KW HLS 2 Front Axle Lift System Upgrade for Existing KW Coilover Kit Porsche 911 997 Turbo Coupe, without PASM 07-12

Model: 19271223

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Coupe, w/o PASM 07-12

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-axle-lift-system-upgrade-for-existing-kw-coilover-kit-porsche-911-997-turbo-coupe-without-pasm-07-12-67926.html

KW HLS 2 Front Axle Lift System Upgrade for Existing KW Coilover Kit Porsche 911 997 Turbo Coupe, without PASM 07-12

Model: 19271223

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Coupe, w/o PASM 07-12

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-axle-lift-system-upgrade-for-existing-kw-coilover-kit-porsche-911-997-turbo-coupe-without-pasm-07-12-67927.html

KW HLS 2 Front Lift System for KW Coilovers Porsche 997.2 Turbo Cabrio 08+

Model: 19271229

Производитель: KW

The KW Suspension Hydraulic Lift System provides additional road clearance for lowered vehicles. When expanded, a range of up to 45mm of lift is produced, thereby helping lowered cars avoid road clearance difficulties such as speed bumps or road construction.

The HLS 2 System is attached to the front axle and allows lifting of the front of the vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. One advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

This KW Hydraulic Lift System is a vehicle-specific solution as a conversion kit for KW coilover kits. KW HLS kits may utilize existing springs, or provide springs (depending on application) and include all associated hardware, hydraulic cylinder and the control unit.
-Allows cars with low ground clearance to clear obstacles more easily
-Complete conversion kit for existing KW Coilovers
-Can be activated from inside the vehicle via a LED position control switch or by an optional remote, eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance

Цена: 6886.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-2-front-lift-system-for-kw-coilovers-porsche-9972-turbo-cabrio-08-67928.html

KW HLS 4 F&R Axle Lift System Porsche 911 997 Turbo Cabrio, with PASM 08-12

Model: 19271429

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting _ maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Cabrio, w/ PASM 08-12

Цена: 8811.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-4-fr-axle-lift-system-porsche-911-997-turbo-cabrio-with-pasm-08-12-67929.html

KW HLS 4 F&R Axle Lift System Porsche 911 997 Turbo Cabrio, with PASM 08-12

Model: 19271429

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Cabrio, w/ PASM 08-12

Цена: 8811.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-4-fr-axle-lift-system-porsche-911-997-turbo-cabrio-with-pasm-08-12-67930.html

KW HLS 4 F&R Axle Lift System Porsche 911 997 Turbo Cabrio, without PASM 08-12

Model: 19271429

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting _ maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Cabrio, w/o PASM 08-12

Цена: 8811.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-4-fr-axle-lift-system-porsche-911-997-turbo-cabrio-without-pasm-08-12-67931.html

KW HLS 4 F&R Axle Lift System Porsche 911 997 Turbo Cabrio, without PASM 08-12

Model: 19271429

Производитель: KW

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

-Allows cars with low ground clearance to clear obstacles more easily
-Available as complete kit including KW coilover kit or as conversion kit
-Can be activated from inside the vehicle via a LED position control switch or
-by an optional remote, thereby eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance
-Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits. KW HLS kit may utilize existing springs, or provide springs (depending on application) all associated hardware, hydraulic cylinder and control unit.



Features:
-Front Lowering: 10-30mm
Notes:
-If the car is equipped with PASM, the PASM needs to be disabled.
-including front axle top mounts
-The battery has to be modified for vehicles with factory battery longer than 278 mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in the kit).

Fitment:
-Porsche 911 997 Turbo Cabrio, w/o PASM 08-12

Цена: 8811.24$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-hls-4-fr-axle-lift-system-porsche-911-997-turbo-cabrio-without-pasm-08-12-67932.html

KW Variant 3 V3 Coilovers withHLS 2 Front Lift System Porsche 997 Turbo Cabrio 08-09

Model: 35271229

Производитель: KW

The KW Suspension Variant 3 Coilover System is state-of-the-art technology derived from motorsports competition for a more precise performance on the road. The separate and independently adjustable rebound and compression damping allows for individual suspension setups with different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range, while the high-speed range which controls the driving safety, is fixed.

Features:
-Damping technology with individually adjustable rebound and compression
-Inox-line stainless steel technology
-Individually height adjustable
-Adjustment parameters approved by TUV
-High-quality components for long durability
-Infinitely variable rebound damping adjustment
-14-way adjustable compression damping
-Unique, individually working damping force adjustment
-Comprehensive Instructions for easy installation

Rebound Adjustment

Being vehicle-specifically possible, the rebound damping is adjusted by a spindle at the end of the piston rod. Mainly, the traction phase (rebound) controls car body vibrations and also influences handling and comfort in the low-speed damping range.

By using the traction phase adjustment, the vehicle can be adapted to the requirements of the driver. Moreover the driving behavior can be regulated from comfortably rolling to sporty and tense with improved road holding characteristics.

Compression Adjustment

The compression phase adjustment is carried out at the lower end of the shock absorber via KWs patented multi-purpose valve. The large number of pre-set parameters of this valve allows for a wide range of adjustment for individual use. The unique low-speed compression adjustment significantly distinguishes this technology from any other.

In the compression range, the driving behavior of the vehicle is drastically influenced. An increase of the damping power supports the vehicle already during compression and therefore avoids rolling and pitching, significantly improving the directional stability.

KW Hydraulic Lift System

The KW Suspension Hydraulic Lift System provides additional road clearance for lowered vehicles. When expanded, a range of up to 45mm of lift is produced, thereby helping lowered cars avoid road clearance difficulties such as speed bumps or road construction.

The HLS 2 System is attached to the front axle and allows lifting of the front of the vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. One advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

This KW Hydraulic Lift System is a vehicle-specific solution as a complete kit with KW Variant 3 coilovers. KW HLS kits may utilize existing springs, or provide springs (depending on application) and include all associated hardware, hydraulic cylinder and the control unit.
-Allows cars with low ground clearance to clear obstacles more easily
-Complete conversion kit for existing KW Coilovers
-Can be activated from inside the vehicle via a LED position control switch or by an optional remote, eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds when using HLS 2
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance

Porsche 997 Turbo Cabrio 08+ Kit Features:
-Adjustable Compression & Rebound Damping
-Stainless Steel Construction
-Lowers 10-30mm Front / 10-30mm Rear
-Spring Rates: Progressive Front / Progressive Rear
-Limited Lifetime Warranty

NOTE 1: If the car is equipped with PASM, the PASM needs to be disabled.

NOTE 2: The battery has to be modified for vehicles with factory battery longer than 278mm. KW recommends the Varta Silver Dynamic 77Ah or Bosch S5 77Ah. (not included in the kit)

Цена: 10893.74$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-variant-3-v3-coilovers-withhls-2-front-lift-system-porsche-997-turbo-cabrio-08-09-67933.html

KW Variant 3 V3 Coilovers withHLS 4 F&R Lift System Porsche 997 Turbo Cabrio 08-09

Model: 35271429

Производитель: KW

The KW Suspension Variant 3 Coilover System is state-of-the-art technology derived from motorsports competition for a more precise performance on the road. The separate and independently adjustable rebound and compression damping allows for individual suspension setups with different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range, while the high-speed range which controls the driving safety, is fixed.

Features:
-Damping technology with individually adjustable rebound and compression
-Inox-line stainless steel technology
-Individually height adjustable
-Adjustment parameters approved by TUV
-High-quality components for long durability
-Infinitely variable rebound damping adjustment
-14-way adjustable compression damping
-Unique, individually working damping force adjustment
-Comprehensive Instructions for easy installation

Rebound Adjustment

Being vehicle-specifically possible, the rebound damping is adjusted by a spindle at the end of the piston rod. Mainly, the traction phase (rebound) controls car body vibrations and also influences handling and comfort in the low-speed damping range.

By using the traction phase adjustment, the vehicle can be adapted to the requirements of the driver. Moreover the driving behavior can be regulated from comfortably rolling to sporty and tense with improved road holding characteristics.

Compression Adjustment

The compression phase adjustment is carried out at the lower end of the shock absorber via KWs patented multi-purpose valve. The large number of pre-set parameters of this valve allows for a wide range of adjustment for individual use. The unique low-speed compression adjustment significantly distinguishes this technology from any other.

In the compression range, the driving behavior of the vehicle is drastically influenced. An increase of the damping power supports the vehicle already during compression and therefore avoids rolling and pitching, significantly improving the directional stability.

KW Hydraulic Lift System

The KW Suspension Hydraulic Lift System provides additional road clearance for lowered vehicles. When expanded, a range of up to 45mm of lift is produced, thereby helping lowered cars avoid road clearance difficulties such as speed bumps or road construction.

The HLS 4 System is attached to the front and rear axles and allows lifting of the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. One advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

This KW Hydraulic Lift System is a vehicle-specific solution as a complete kit with KW Variant 3 coilovers. KW HLS kits may utilize existing springs, or provide springs (depending on application) and include all associated hardware, hydraulic cylinder and the control unit.
-Allows cars with low ground clearance to clear obstacles more easily
-Complete conversion kit for existing KW Coilovers
-Can be activated from inside the vehicle via a LED position control switch or by an optional remote, eliminating any need for interior wiring.
-Can be activated while driving (up to 50 mph)
-Fast lifting - maximum lift occurs within 4-5 seconds
-High-quality cylinder unit with durable aluminum construction
-Sealed unit for corrosion and dirt resistance

Porsche 997 Turbo Cabrio 08+ Kit Features:
-Adjustable Compression & Rebound Damping
-Stainless Steel Construction
-Lowers 10-30mm Front / 10-30mm Rear
-Spring Rates: Progressive Front / Progressive Rear
-Limited Lifetime Warranty

NOTE 1: If the car is equipped with PASM, the PASM needs to be disabled.

NOTE 2: The battery has to be modified for vehicles with factory battery longer than 278mm. KW recommends the Varta Silver Dynamic 77Ah or Bosch S5 77Ah. (not included in the kit)

Цена: 12643.74$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/kw-variant-3-v3-coilovers-withhls-4-fr-lift-system-porsche-997-turbo-cabrio-08-09-67934.html

Moton Club Sport Damper System Track Porsche 997 05-12

Model: M 500 129

Производитель: Moton

The Club Sport line is designed for the serious Club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you.

The Club sport damper is double adjustable with seperate rebound and compression controls. Each has seven adjustment levels to help you dial in for every condition you encounter. They are dependable and easy to work with, this system will allow you to use a wide range of spring rates and eliminate the worry of constant revalve every time you want to increase or decrease your spring rate; you can put them on a drive.

The Club sport dampers are designed to be extremely comfortable while driving on daily roads and can simply be adjusted in a few seconds to a real race setup at the race track. When adjusting the dampers, each click is very noticable to the driver and an ideal setup is easy to find.

Features:
*Seperate Bump (7) and rebound (7) control
*Ride height adjustable
*Unique blow off valve system in remote reservoirs
*Large piston rod diameter for more fluid displacement
*Adjustable gas pressure for added lifting force
*Large main piston for quick response
*No preloaded valve stacks needed for low speed damping control
*Swivel banjo hoses for easy installation of remote reservoirs

Benefits:
*Comfortable on daily roads
*Easy to adjust to a real race setup
*Easy to work with
*Every single adjustment done is very noticable to the driver
*Proven reliability
* Wide range of spring rates can be used
*Improved platform stability
*Improved traction, high grip level
*Improved curb, stone, and bumpy track control
*Improved tire wear

Porsche 997 system includes Front Struts and Rear coilovers. (Rear Pin Mount) Quick disconnects front and rear.

Note: Pictures are for representation only. Actual product may vary.

Цена: 7375.00$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/moton-club-sport-damper-system-track-porsche-997-05-12-67935.html

Ohlins Road & Track Coilovers Subaru Impreza GRB 08-12

Model: SUS MI10

Производитель: Ohlins

Цена: 4561.25$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/ohlins-road-track-coilovers-subaru-impreza-grb-08-12-67936.html

Torque Solution Camber Control Arms (Dogbone) Porsche 911 996 | 997 98-12

Model: TS-POR-002

Производитель: Torque

Torque Solution Dogbone Rear Control Arms

Цена: 632.19$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/torque-solution-camber-control-arms-dogbone-porsche-911-996-997-98-12-67937.html