Lancer Evolution для тюнинга в Pоссии

AMS GT42R Турбокит Evo 6-9 (AMS_GT42R_Turbokit)

AMS GT42R Турбокит Evo 6-9

Model: AMS_GT42R_Turbokit

Производитель: AMS

The AMS EVO VIII GT42R Turbo Kit consists of the following:

AMS Custom GT42R Turbo header with Divided Collector
Garrett GT42R Turbo
Limited lifetime warranty against header cracking
Twin Tial 38 MM Wastegates of your color choice
4" Stainless Steel V-band Downpipe to terminate under the car
3" Lower IC pipe for use with our Race AMS FMIC
All necessary Oil and Water Lines
Small Koyo Radiator Modified to use on the EVO VIII and IX
Silver High Temp Coating on the Header, Turbine Housing and Downpipe
900whp +

Цена: 9150.00$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/ams-gt42r-turbokit-evo-6-9-78720.html

9150.00$

0

AMS GT850R Турбокит Evo 6-9 (AMS37RTurboKit)

5750.00$

0

AMS GT35R Турбокит Evo 6-9 (AMSGT35RL)

5650.00$

0

AMS GT3076R Турбокит Evo 6-9 (AMSGT3076R)

5450.00$

0

FP Red Tурбина Evo 6-9

2790.00$

0

FP Black Tурбина Evo 6-9

2790.00$

0

FP Green Tурбина Evo 6-9

2790.00$

0

FP Green 73HTA Tурбина Evo 6-9
NTEVOGREEN73HTA

FP Green 73HTA Tурбина Evo 6-9

Part Number: NTEVOGREEN73HTA

Производитель: ForcedPerformance

Forced Performance Turbo has improved upon every aspect of the older Green turbo. The 73HTA uses all the same bolt holes and threads as the factory Mitsubishi product, and all the castings are OEM Mitsubishi. To keep things simple, we offer the most popular version of the Green: The 73HTA with an 18psi wastegate.
All FP Evo Green 73HTA turbocharger come with an 18psi HP wastegate actuator. Forced Performances 73HTA wastegate actuator features a heavier spring and does not crack open until boost reaches 18psi. Applications running high boost such as race gas or methanol injection will benefit from the extra spring pressure. Using the HP actuator will result in retaining more boost higher into the RPM range compared to the stock Evo 9 wastegate actuator (11psi). The HP actuator isnt going to make much difference on pump gas cars running 18-20psi, but it isnt going to hurt anything either. Be advised that boost cannot be set BELOW 18psi when using this HP actuator, a concern for those who are not prepared to run their car at that kind of power level.
Forced Performances custom 80mm Flow Advancement Port compressor cover helps reduce huffing and surging sounds that are often reported with larger, stock format hybrids when lugging the engine at low RPM and high boost pressure but perhaps even more useful is the way it helps feed the splitter blades of the compressor wheel resulting in increased flow. This larger inlet also increases the volume of the intake air pipe and reduces vacuum at the inlet of the turbo. Additionally the volute of the cover is now exactly tailored to the HTA wheels aero for the best performance possible. The FP Green with 80mm Flow Advancement Port requires the FP Intake Air Pipe or a 3" coupler.
The FP Green 73HTA features the 54lb/min 73mm HTA compressor wheel and a new 65mm high efficiency turbine wheel for the perfect combination of power and rapid spool. The combination of improved compressor and turbine flow characteristics results in a very wide RPM range performance increase. Spool up is very stock like, with part throttle boost being easily achieved at low engine RPM for city driving. Absent from this turbo is any hint of compressor surge. Even 5th gear WOT pulls starting at 2krpm do not result in compressor surge. Mid range and top end performance are dramatically improved as a result of the increased airflow capacity of the compressor and turbine sections.

Notes:
This turbo requires the FP 80mm intake pipe, available separately.
Installation of this turbo on the 03-05 Evolution 8 requires the separate installation kit, available separately.