BMW Mini Cooper S для тюнинга в Pоссии

Alta Performance High Flow Panel Filter Mini Cooper S R56 07-13 (AMP-INT-106)

Alta Performance High Flow Panel Filter Mini Cooper S R56 07-13

Model: AMP-INT-106

Производитель: Alta

ALTA Performance was the first to offer you a replacment high flow drop in filter for your R56 and JCW. This enviromently responsible filter is completely reusable and will last you the life of your car! This high flowing, super cleaning foam media allows ALTA to make the filter thinner while keeping the maximum amount of volume to hold dirt. This simple change allows for more air to be drawn across the entire filter. This also allows for 2 times the volume in the OEM intake box, and allows for the intake to breathe that much better!

The ALTA Drop in filter makes a few extra HP but where it really shines is when it gets dirty. OEM and K&N filters get clogged the more dirt gets in them and loose horsepower. The ALTA Foam media keeps flowing even after its full of dirt providing you with maximum horsepower between filter servicing.

Цена: 61.88$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/alta-performance-high-flow-panel-filter-mini-cooper-s-r56-07-13-75750.html

61.88$

0

K&N Replacement Panel Filter Mini Cooper/Clubman S 07-12 (33-2936)

55.96$

0

Alta Performance Cold Air Intake System Mini Cooper S 07-13 (AMP-INT-401BK)

Alta Performance Cold Air Intake System Mini Cooper S 07-13

Model: AMP-INT-401BK

Производитель: Alta

ALTA Performance, has once again set the bar very high for the competition! The ALTA Turbo MINI Cold Air Intake not only adds a proven 10WHP and 10ft-lbs of torque to your 2007+ MINI Cooper Turbo S and JCW, but it also unlocks the sound from your turbo! The ALTA Five-Ply Silicone Elbow included with the intake is rated for 200psi, and 400 degrees. Like other ALTA products this part is over-built to ensure a lifetime of trouble free use. This is one of the key features to this intake as the bend provides the proper MAF (Mass Air Flow) sensor reading and ensures no Check Engine Lights.

With an ALTA intake system your car will make a throaty, deep tone on throttle that is undeniably modified. You will be able to hear your turbo spooling and hear your blow off valve every time it opens. Even the stock one. The ALTA Turbo MINI Air Box was designed with light weight aluminum. This provides a stiff, strong, and corrosion proof shroud for the ALTA high flow foam filter and a connection point for the fresh air tube. With a black wrinkle finish powder coat is applied to keep things looking clean and finished for that show appearance under the hood.

Included with all ALTA intakes is a high flow foam filter. ALTA Performance filters feature a unique two piece design allowing the user to remove the foam filter element for easy cleaning. Easily run the element under a faucet for cleaning and ring out by hand. Simply slip the foam sleeve back over the filter frame and youre ready to go. This ALTA intake is designed to remove the OEM hood scoop plug/screen. During initial testing it was found that removing this provides consistent ambient temps to the filter. While its not a traditional "Cold Air Intake" where the filter is located in a fender well, the ALTA Cold Air Intake is just as good as it still gets a constant flow of ambient cold air. This is just one of the reasons why this intake has dyno proven HP!

Features:

-Gains up to 10whp & 10 ft-lbs

-Silicone Intake Hoses

-Deep, Throaty Intake Tone

-Aluminum Intake Box

-High Flow Foam Filter

-Designed to use OEM intake scoop*

-No Check Engine Lights

Fitment:

-Mini Cooper S (R56) 1.6L Turbo 07-13

Notes:

-*On early production cars the screen is decorative only and is sealed off completely. You must remove it for best performance.

Цена: 337.50$

0

Постоянная ссылка на данный товар:
http://top-speed.ru/products/alta-performance-cold-air-intake-system-mini-cooper-s-07-13-75752.html

337.50$

0

Alta Performance Cold Air Intake System Red Mini Cooper S 07-13 (AMP-INT-401RD)

Alta Performance Cold Air Intake System Red Mini Cooper S 07-13

Model: AMP-INT-401RD

Производитель: Alta

ALTA Performance, has once again set the bar very high for the competition! The ALTA Turbo MINI Cold Air Intake not only adds a proven 10WHP and 10ft-lbs of torque to your 2007+ MINI Cooper Turbo S and JCW, but it also unlocks the sound from your turbo! The ALTA Five-Ply Silicone Elbow included with the intake is rated for 200psi, and 400 degrees. Like other ALTA products this part is over-built to ensure a lifetime of trouble free use. This is one of the key features to this intake as the bend provides the proper MAF (Mass Air Flow) sensor reading and ensures no Check Engine Lights.

With an ALTA intake system your car will make a throaty, deep tone on throttle that is undeniably modified. You will be able to hear your turbo spooling and hear your blow off valve every time it opens. Even the stock one. The ALTA Turbo MINI Air Box was designed with light weight aluminum. This provides a stiff, strong, and corrosion proof shroud for the ALTA high flow foam filter and a connection point for the fresh air tube. With a red wrinkle finish powder coat is applied to keep things looking clean and finished for that show appearance under the hood.

Included with all ALTA intakes is a high flow foam filter. ALTA Performance filters feature a unique two piece design allowing the user to remove the foam filter element for easy cleaning. Easily run the element under a faucet for cleaning and ring out by hand. Simply slip the foam sleeve back over the filter frame and you're ready to go. This ALTA intake is designed to remove the OEM hood scoop plug/screen. During initial testing it was found that removing this provides consistent ambient temps to the filter. While it's not a traditional "Cold Air Intake" where the filter is located in a fender well, the ALTA Cold Air Intake is just as good as it still gets a constant flow of ambient cold air. This is just one of the reasons why this intake has dyno proven HP!

Features:
-Gains up to 10whp & 10 ft-lbs
-Silicone Intake Hoses
-Deep, Throaty Intake Tone
-Aluminum Intake Box
-High Flow Foam Filter
-Designed to use OEM intake scoop*
-No Check Engine Lights

Fitment:
-Mini Cooper S (R56) 1.6L Turbo 07-13

Notes:
-*On early production cars the screen is decorative only and is sealed off completely. You must remove it for best performance.